Third-Row Seat
WARNING.
Do not stack cargo higher than the
seatbacks:
Stacking luggage or other cargo
higher than the seatbacks is
dangerous. During a sudden stop or
collision, objects can fly around and
become projectiles that could hit and
injure passengers.
Make sure luggage and cargo is
secured before driving:
Not securing cargo while driving is
dangerous as it could move or be
crushed during sudden braking or a
collision and cause injury.
Do not drive with the seatback
unlocked:
All of the seatbacks play an
important role in your protection in a
vehicle. Leaving the seatback
unlocked is dangerous as it can allow
passengers to be ejected or thrown
around and baggage to strike
occupants in a sudden stop or
collision, resulting in severe injury.
After returning the seatback at any time, even when there are no other passengers, rock the seatback to make sure it is locked in place.
Never allow a passenger to sit or stand
on the folded seatback while the
vehicle is moving:
Driving with a passenger on the
folded seatback is dangerous.
Allowing a child to sit up on the folded seatback while the vehicle is moving is particularly dangerous. In a sudden stop or even a minor collision, a child not in a proper seat or child-restraint system and seat belt could be thrown forward, back or even out of the vehicle resulting in serious injuries or death. The child in the baggage area could be thrown into other occupants and cause serious injury.
NOTE.
- The third-row seat cannot be removed.
- When returning a third-row seat to its original position, also replace the seat belt to its normal position. Verify that the seat belt pulls out and retracts.
Split-Folding the Third-Row Seatback
To create a flat luggage compartment space, fold the seatbacks forward.
To fold third-row seat
1. Slide the second-row seat all the way forward.
2. Insert the third-row outboard seat belts in the retainers.
3. Lower the head restraints all the way down.
4. Pull the strap and fold the seatback forward.
NOTE.
To create a flat luggage compartment space from the rear of the vehicle to the back of the front seats, fold the second-row and third-row seats.
To return third-row seat to its original position
Return the seatback to its original position while pulling its strap.
Make sure the seatback is secured by attempting to lightly move it forward and back.
See also:
Exterior
The outside of the Tribute didn't get as much of a face-lift as did the
Escape. The grille lost its crossbar, and the Mazda logo has moved up, while the
headlights and taillights are new. Fog ligh ...
Supplemental Restraint System Components
(1) Driver seat slide position sensor.
(2) Side and curtain inflators and air bags.
(3) Driver/Front passenger dual stage inflators and air bags.
(4) Air bag/front seat belt pretensioner system w ...
Safety Certification
FCC ID: CB2MBLUEC07 IC:279BMBLUEC07.
This device complies with Part 15 of the
FCC Rules and with RSS-210 of Industry
Canada. Operation is subject to the
following two conditions:
(1) This device ...