Steps for Determining the Correct Load Limit:
Steps for Determining Correct Load Limit: (1) Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs” on your vehicle's placard.
(2) Determine the combined weight of the driver and passengers that will be riding in your vehicle.
(3) Subtract the combined weight of the driver and passengers from XXX kg or XXX lbs.
(4) The resulting figure equals the available amount of cargo and luggage load capacity. For example, if the “XXX” amount equals 1400 lbs. and there will be five 150 lb passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs. (1400_ 750 (5 × 150) = 650 lbs.).
(5) Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4.
(6) If your vehicle will be towing a trailer, the load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle.
See also:
Dynamics Performance
The new Mazda Tribute features a range of powertrain and chassis improvements
that enhance the vehicle's already high levels of driving enjoyment. These
include a new and powerful 2.3-litre MZR pe ...
Seat Belt (Except Center-Rear Position)
NOTE:
When using the center-rear seat belt, refer to
“Center-Rear Position Seat Belt”.
Fastening the Seat Belt
1. Grasp the seat belt tongue.
2. Slowly pull out the lap/shoulder belt.
3. Ins ...
Efforts to promote vehicle recycling
Mazda has achieved recyclability ratios of over 90 percent. Beginning in
2005, Mazda also became the first in the auto industry to fully implement
'bumper-to-bumper recycling' that recycles materi ...