Audio Control Switch Operation (Steering Wheel)
When the audio unit is turned on, operation of the audio unit from the steering wheel is possible.
NOTE:
Because the audio unit will be turned off under
the following conditions, the switches will be
inoperable.
- When the ignition switch is turned to the LOCK position.
- When the power button on the audio unit is pressed and the audio unit is turned off.
- When the CD being played is ejected and the audio unit is turned off.
Without Bluetooth Hands-Free and navigation system
With Bluetooth Hands-Free only/ Bluetooth Hands-Free and navigation system
Use the talk button, pick-up button, and hang-up button for navigation system sound operation.
For details, refer to the separate manual “NAVIGATION SYSTEM”.
NOTE:
- The talk button, pick-up button, and hangup
button are operable with the audio unit
turned off.
- Mazda has installed this system to prevent distraction while driving the vehicle and using audio controls on the dashboard.
Always make safe driving your first priority.
Adjusting the Volume
To increase the volume, pull up the volume switch.
To decrease the volume, press down the volume switch.
Changing the Source
Press the mode switch () to
change
the audio source (FM1 radio> FM2 radio>
AM radio> CD player or CD changer>
SIRIUS1> SIRIUS2> SIRIUS3> AUX>
cyclical).
NOTE:
CD, CD changer, and SIRIUS digital satellite
radio modes cannot be selected in the
following cases:
· CD, CD changer, or SIRIUS digital satellite
radio unit is not equipped on the audio
system.
· CD has not been inserted.
Connect a portable audio unit or similar product on the market to the auxiliary jack to listen to music or audio over the vehicle's speakers. Change the audio source to AUX mode.
The audio source is changed to the AUX mode only when a commercially available portable audio unit is connected to the auxiliary jack.
Seek Switch
When listening to the radio
Pull up or press down the seek switch, the radio switches to the next/previous stored station in the order that it was stored (1―6).
Pull up or press down the seek switch for about 2 seconds until a beep sound is heard to seek all usable stations at a higher or lower frequency whether programmed or not.
When playing a CD
Pull up the seek switch to skip to the next track.
Press down the seek switch to repeat the current track.
Mute Switch
Press the mute switch ()
once to mute
audio, press it again to resume audio
output.
NOTE:
If the ignition switch is turned to the LOCK
position with the audio muted, the mute will be
canceled.
Therefore, when the engine is restarted, the audio is not muted. To mute the audio again, press the mute switch (
).
See also:
Audio Control Switch Operation (Steering Wheel)
When the audio unit is turned on,
operation of the audio unit from the
steering wheel is possible.
NOTE:
Because the audio unit will be turned off under
the following conditions, the switches wil ...
Lighting Control
Headlights
Type A (Without AUTO position)
Turn the headlight switch to turn the
headlights, other exterior lights and
dashboard illumination on or off.
NOTE:
To prevent discharging the batte ...
Scheduled Maintenance (USA, Canada, and Puerto Rico)
Follow Schedule 1 if the vehicle is operated mainly where none of the
following conditions
apply.
- Repeated short-distance driving.
- Driving in dusty conditions.
- Driving with extended use of ...