Seat Warmer
* Some models.
The front seats are electrically heated. The ignition switch must be in the ON position.
Press the switch to turn the seat warmer on or off. When the switch is in the ON position, the indicator light will come on.
WARNING.
Be careful when using the seat
warmer. The heat from the seat
warmer may be too hot for some
people, as indicated below, and
could cause a low-temperature
burn.
Infants, small babies, elderly
people, and physically
challenged people
People with delicate skin
People who are excessively
fatigued
People who are drunk
People who have taken sleepinducing
medicine such as
sleeping pills or cold medicine
Do not use the seat warmer with
anything having high moistureretention
ability such as a blanket
or cushion on the seat. The seat
may be heated excessively and
cause a low-temperature burn.
Do not use the seat warmer even
when taking a short nap in the
vehicle. The seat may be heated
excessively and cause a lowtemperature
burn.
Do not place heavy objects with
sharp projections on the seat, or
insert needles or pins into it. This
could cause the seat to become
excessively heated and result in
injury from a minor burn.
CAUTION.
Do not use organic solvents to clean the seat. It may damage the seat surface and the heater.
NOTE.
Use the seat warmer when the engine is running, and do not continue to use it for a long period of time.
The temperature of the seat warmer cannot be adjusted beyond High and Low because the seat warmer is controlled by a thermostat.
See also:
Vent Operation
Adjusting the Vents
Directing airflow
Side Vents
To adjust the direction of airflow, open the
vents and rotate them left and right.
Center Vents
To adjust the direction of airflow, move
t ...
Limitations to SRS Air Bag
In severe collisions such as those described previously in “SRS Air Bag
Deployment
Criteria”, the applicable SRS air bag equipment will deploy. However, in some
accidents,
the equipment may not ...
Starting the Engine
NOTE.
Engine-starting is controlled by the spark
ignition system.
This system meets all Canadian Interference-
Causing Equipment Standard requirements
regulating the impulse electrical field stre ...